Hyperion EOS 0610inet charger

View previous topic View next topic Go down

Hyperion EOS 0610inet charger

Post  watersteps on Sun Jun 01, 2008 10:38 am

Hello, I could use some help with a wire location problem. I just started building my own A123 packs, they are 4S1P packs. I decided to install the balance wires while I build each pack. OK the pack is done and I have a female connector for a 4S1P which has 5 wire connections in it. Each wire is labeled on my pack 1 thru 4 and one black wire for ground. My problem is I don't know where to place the ground wire!!
I thought I could determine this by looking at the balance plug in bar that connects to the charger, but I'm not sure. The charger and balance bar can be seen at http://media.hyperion.hk/dn/eos.

watersteps

Posts : 1
Join date : 2008-06-01

View user profile

Back to top Go down

Re: Hyperion EOS 0610inet charger

Post  Dave Matison on Sun Jun 01, 2008 7:09 pm

The negative wire connects to the ends of the batteries opposite the power leads-on the SPT, you need only solder the wire onto the "gold bar" that connects the two cells.

Dave Matison

Posts : 5
Join date : 2008-06-01

View user profile

Back to top Go down

Re: Hyperion EOS 0610inet charger

Post  Dave Matison on Sun Jun 01, 2008 7:09 pm

The negative wire connects to the ends of the batteries opposite the power leads-on the SPT, you need only solder the wire onto the "gold bar" that connects the two cells.

Dave Matison

Posts : 5
Join date : 2008-06-01

View user profile

Back to top Go down

Re: Hyperion EOS 0610inet charger

Post  Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum