A balancing tap necessary for charging A123 Cells in SPT using AstroFlight charger?

Post new topic   Reply to topic

View previous topic View next topic Go down

A balancing tap necessary for charging A123 Cells in SPT using AstroFlight charger?

Post  kitty20155 on Wed Jun 18, 2008 11:45 am

Since there's no tap on SPT and you're selling AstroFlight Chargers.
I'm guessing a balancing tap is NOT necessary for charging A123 Cells in SPT using AstroFlight charger?
I read the charger's manual and it's kind of vague about how to charge A123 cells in SPT.
Thank you in advance!

kitty20155

Posts: 1
Join date: 2008-06-09

View user profile

Back to top Go down

Need for balancing

Post  mecpete on Fri Jun 20, 2008 10:47 am

You are correct, there is no need to balance A123 cells. They are self balancing. There is a good write up on the subject on Sid Kaufman's www.slkelectronics.com site. Hope this is helpful! Pete.

_________________
**Owner of Model Electronics Corporation**

mecpete
Owner

Posts: 11
Join date: 2008-05-14
Location: Renton, WA

View user profile http://www.modelelectronicscorp.com

Back to top Go down

Balancing

Post  mecpete on Fri Jun 20, 2008 10:52 am

You are correct, there is no need to balance A123 cells, as they are self balancing. There is a very good article on the subject on Sid Kaufman's site www.slkelectronics.com. Thanks - Pete.

_________________
**Owner of Model Electronics Corporation**

mecpete
Owner

Posts: 11
Join date: 2008-05-14
Location: Renton, WA

View user profile http://www.modelelectronicscorp.com

Back to top Go down

View previous topic View next topic Back to top


Permissions of this forum:
You cannot reply to topics in this forum